If you lower your RSX you need a camber kit to prevent uneven tire wear and to place the tires at the most effective camber setting.

Adjustment range: -4.00 degrees to +6.00 degrees.

Front Camber Kit : The new EZ Cam(tm) XR is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degrees (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Rear Camber Kit: Kit comes with rubber bushings only. EZ Arms XR make rear camber adjustment possible on cars that have been lowered for performance and for those that retain the stock ride height. Simply replace the OE arm with the EZ Arm XR, and you can adjust the rear camber.

TECH TIP: If your car is a 2002 RSX see following details --> VIN # 2C003184 and after - cars with vin before this kit will not fit.